Large format extruded aluminum radiator TAL 3 Ferroli

Description

Extruded aluminum radiators with high radiating power, flat and linear design, high thermal emissions and low inertia (allowing the system to quickly reach full capacity). Suitable for low temperatures. The radiators are made up of die-cast aluminum heads and extruded aluminum bars with special alloys that guarantee high resistance to corrosion while reducing weight, which makes installation extremely easy. Made in Spain with elastic joint technology that allows total sealing. • The heads are subjected to a special washing cycle and a surface treatment before being painted using anaphoresis. • The heads are joined with bars cut to size with a specific high pressure semi-automatic machine. They are then sealed with a special adhesive. • It is factory assembled only in indivisible modules of 2 (TAL 2) or 3 elements (TAL 3). Each of them is available in 6 different heights, with separations from the center that range between 1,000 and 2,000 mm. • The modules are tested one by one with a pressure of 13 bar and allow a maximum working pressure of 10 bar. Each module is painted in white RAL9010 with epoxy-polyester powders and then heated in an oven at a controlled temperature. • The nipple kit accessory allows mounting modules with 2 or 3 elements in any composition depending on the needs. • It is reversible up and down (but not front to back). • It can be used both in traditional systems and in monotube systems.